As an important part of the intelligent parking lot management system,parking barrierhas played a very important role in our lives when the current parking problem is more serious.Parking barrierserves as a system for managing the inflow and outflow of vehicles. It is often used in combination with the parking lot system, so you must pay more attention when selecting and installing it. Choosingparking barriersuitable for your own parking lot will allow people to park and pick up the car more quickly and conveniently in the future parking management.

1. Selection ofvehiclebarriers in parking lot:

At present, there are many types and functions of parking lot systems on the market. Therefore, there are many types and styles of barrier equipment used with parking lot systems. For users,they need to pay special attention to choosing more suitable vehicle barriers.

First of all,parkingbarriers are divided intodifferent types:straightboombarriers,folding boombarriers,fence boombarriers and advertising barriers.The advantages of barriers of each typesare different depending on the location of the user.Usersshould select appropriatevehiclebarriers according to the parking system in their parking lots and their locations.

In addition, the important part of selecting the barrier isconsideringthe performance of the movement of the barrier. According to the length of the barrier and the type of barrier, the performance of the movement of each barrier is different. In order to ensure the performance of the barrier In terms of service life, we equip single-movementand dual-movementbarriersaccording to the different needs of users. Of course, the performance of the movement is different, and the price will vary a lot. Therefore, this is also the reason why the parking system with the same function seems to be the same,butthe price is so different.

2. Installation ofvehiclebarriers in parking lot:  

1) .Level problem: The barrier should be installed on a horizontal surface. If the road is uneven and sloped, a water platform should be built. The wiring installation can be carried out according to the drawings. Generally, there will be no problems.  

2).Ground induction coil test: When the smart parking system is connected to the line, the ground induction coil can be tested. Don't wait until the ground induction line is buried before testing. The test method is to put an iron plate on the coil when the ground-sensing red light is flashing, and remove the iron plate when the red light is on, and it is normal if the boom automatically falls.  

3).Installation of ground-induction coils:Generally, two ground-induction coils are installed in a lane, one at the front and one at theback. The installation method is to cut a 10 cm deep, 640x960.8M square nest on the road, cut the four corners to 45 degrees, place 5 to 6 loops of wire, and press it tightly. No joints or damage are allowed inside the coil. Install it. After that, seal it with dry cement.  

4).The problem of cutting the length of theboom: If the boomis cut, then the torque balance needs to be re-adjusted according to the length of theboom, which can prevent the motor from overheating and wearing the gearbox.

A company’s group is inseparable from the individual’s performance. The parking lot system is also the same. The parking lot barrier is the final enforcement device for the user's authority in the parking system management function. It is very important when selecting the parking lot barrier. To make parking more convenient, it is necessary to improve the hardware facilities of these parking lots to make parking no longer difficult.