The Features of Smart Cylinder Swing Barrier Turnstile Gate

The smart cylindrical swing barrier turnstile gate can be compatible with the  IC cards, ID cards, QR codes, fingerprints devices, face recognition devices and other equipment, providing safe and orderly means of passage for personnel entering and exiting, and effectively managing personnel entry and exit. It can be widely used in stations, subways, factories, buildings, office building, hotels, clubs, hospital and so on.

There are the mainly modes: 

Intelligence security wing barrier turnstile gate with face recognition device. 

Full automatic pedestrian cylinder swing turnstile gate with card reader. 

Dual direction with wide channel rode barrier  cylindrical swing turnstile and so on.

Features of Smart Cylindrical Swing Barrier Turnstile Gate:

1.With fault self-checking and alarm prompt function, it is convenient for client to maintain and use.

2.Anti-pinch and anti-bumping swing barrier gate , when the swing arm is blocked during the reset process, the motor will automatically stop working within the specified time, and reset again after the default delay (until reset).

3.Anti-shock function, the swing arm is automatically locked when it does not receive the opening signal. 　　 　　

4.The swing arm can be adjusted synchronously (for the case of double pendulum). 　　 　　

5.It has an automatic reset function. After the gate is opened, the system will automatically cancel the user's permission to pass this time if it does not pass within the specified time. 　　 　　

6.Normally open or normally closed can be adjusted freely to meet the requirements of different venues. 　　 　　

7.It can be connected to a variety of card readers and can receive relay switch signals to work. 　　 　

8.One-way and two-way traffic wing turnstile barrier gate function, which can control the entry and exit of personnel in one or two directions. 　　 　　

9.Remote control and management can be realized directly through the management computer. 　　 　　

10.Delay automatic reset, the system defaults to automatic reset 10 seconds (adjustable) after opening. 　　 　　

11. The swing arm automatically swings open when power is off, and closes when power on, which meets the fire protection requirements.