The automatic parking barrier gate system refers to the equipment that realizes the active identification of the equipment at the entrance and exit of the parking area based on modern electronic and information technology. Here has two models of parking barrier : Non-touch card access control parking barrier and License plate recognition intelligence parking barrier . After non-touch card or license plate recognition, it can identify, admit/reject, and guide the vehicles entering and leaving the area. , Record, charge, release and other intelligent processing. The intention is to effectively control the entry and exit of vehicles, and record all detailed information to actively calculate the toll amount, and complete the safe handling of the vehicles and tolls in the venue. The following is a detailed introduction to various aspects of the parking lot system.

Parking lot management system

The parking lot generally adopts an inductive parking lot barrier system, and a set of entrance and exit management equipment is installed at the entrance and exit of the parking lot, so that the parking lot constitutes a relatively closed place. Vehicles entering and exiting can be identified through the license plate recognition intelligence parking barrier system, and the system can instantaneously complete operations such as inspection, recording, and charging, and complete the vehicle management of the parking lot by opening and closing the barriers of the parking lot system.

Parking lot system installation

Determine the installation width: the width of the lane cannot be less than 3 meters.

Installation of barriers and license plate recognition equipment: It is better for the license plate recognition equipment of the parking lot management system to be installed on a level ground to avoid difficulties in parking identification for up and downhill car owners. The underground parking lot ensures that the barriers are not obstructed by the height. It is better to use folding bar barriers, and it is better to use barrier barriers for unattended parking lots. The location of the barriers and the license plate recognition equipment is related to the use, so after the installation is in place, simulate users to debug this location, and the license plate recognition equipment of the parking lot management system and the barriers can be installed after the location is determined.

Installation of license plate recognition equipment: Determine the installation location. The camera's perspective of the parking management system is mainly the license plate location. The installation height is generally about 50cm. After the installation is completed, it needs to be debugged to determine the final location.

The position of the sentry box: The sentry box is generally installed in the exit position, and the equipment such as the parking lot toll system computer is installed in the sentry box. Generally, the sentry box is not less than 4 square meters.

After completing the above equipment, install the parking lot management system software on the computer, and then debug the equipment to complete the installation of the entire parking lot system.

Parking system barriers

Parking system barriers are facilities that can be raised and lowered for interception controlled by remote control at the entrance and exit of the parking lot. Generally divided into straight poles, folding poles and fence poles, different types of barriers can be installed according to different needs.